Building Hardware

• Mainboard Assembly
• Testing and Calibration
• TS-USB4 Box Build
  • Step 1: Source a USB4/TBT Adaptor
  • Step 2: Modify the USB4/TBT Adaptor
  • Step 3: Design and/or Source an Interposer
  • Step 4: Install the Adaptor on the Interposer
  • Step 5: Install the Interposer on the Mainboard
  • Step 6: Assemble the Front Endcap
  • Step 7: Install the Front Endcap
  • Step 8: Install the Boards in the Enclosure
  • Step 9: Assemble the Back Endcap
  • Step 10: Install the Back Endcap
  • Step 11: Engrave the Enclosure
• TS-PCIe Box Build
• Changing Variants